A Thorough Understanding of Assessment Validation: Validating Assessments
A Thorough Understanding of Assessment Validation: Validating Assessments
Blog Article
RTOs face many tasks after registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation is typically the most daunting.
Though we've written extensively on validation, let's clarify it again. ASQA describes it as a quality assessment review.
Simply put, validation confirms which aspects of an RTO's assessment process are right and identifies where improvements are needed. A clear understanding of its main components makes it less intimidating.
Clause 1.8 of the 2015 SRTOs indicates that RTOs need to ensure their assessment systems, including RPL, are compliant with training package requirements and conducted in accordance with the Principles of Assessment and Rules of Evidence.
According to the standards, RTOs must conduct two types of validation.
The initial assessment validation ensures your RTO's assessments comply with the training package requirements.
The following validation type ensures that assessments follow the principles of assessment and rules of evidence.
Thus, we understand that validation is done before and after the assessment. This article highlights the first type: assessment tool validation.
The Fundamentals of the Two Types of Assessment Validation
The Meaning of Assessment Validation
As noted earlier and in our earlier blog entries, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, also known as pre-assessment validation or verification, pertains to the first part of the clause, focusing on ensuring all unit requirements are met and that all workbooks are fully compliant.
On the implementation side, post-assessment validation ensures Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.
In this article, we will emphasize assessment tool validation.
Procedure for Assessment Tool Validation
Having outlined the two types of validation, it’s time to dive into assessment tool validation.
Best Times to Conduct Assessment Tool Validation
Assessment tool validation ensures that all elements, performance criteria, and performance and knowledge evidence are included in your assessment tools.
Therefore, whenever you acquire new learning resources, you must conduct assessment tool validation before allowing students to use them.
You don't have to wait until your next 5-year validation schedule. Validate new resources right away to ensure they’re appropriate for student use.
Still, this isn't the only reason to perform this type of validation. Conduct assessment tool validation also when you:
- when resources are updated
- new training products are added by you on scope
- when course is reviewed against training product updates
- learning resources are identified as a risk during the risk assessment
ASQA applies a risk-based regulation approach, expecting RTOs to do regular risk assessments. Hence, student complaints about learning resources are a good reason for assessment tool validation.
Training Products to Validate
Do not forget, this validation ensures compliance of all learning resources before they are used. All RTOs must validate resources for each unit.
Essential Resources for Assessment Tool Validation
Teaching Materials
For validation of your assessment tools, you will require the full set of your learning resources:
Mapping tool – start by investigating this document. It shows which assessment items meet unit requirements, facilitating quicker validation.
Learner/student workbook – ensure it's appropriate for use as an assessment tool. Check if instructions are clear and answer fields are sufficient. This is a frequent gap.
Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item are provided. Clear benchmarks are essential for reliable assessment outcomes.
Other related resources – could include checklists, registers, and templates developed apart from the workbook and marking guide. Validate them to confirm they fit the assessment task and meet unit requirements.
Validation Group
Clause 1.11 sets out the requirements for validation panel members, stating that validation can be conducted by one or more individuals. RTOs generally require all trainers and assessors to be involved, sometimes including industry experts.
Your validation panel, as a group, must possess:
Up-to-date vocational competencies and industry skills pertinent to the unit being validated
Recent knowledge and expertise in vocational teaching and learning
One of the following training and assessment qualifications:
TAE40116 Certificate IV in Training and Assessment or the next version
Validation document/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool aids in both the validation process and documentation. It helps visualize how each assessment item meets each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It also acts as evidence that you have validated your resources prior to student use.
Although ASQA does not recommend or require a particular template for assessment tool validation, many templates are available online. These tools typically have validators review the tools in their entirety to determine if they meet the principles of assessment.
Assessment Principles Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Though these templates make validation easier, they can lead to judgment errors because they provide little room for comments on each assessment item.
It is advisable to use a more detailed template to inspect each unit requirement and its corresponding assessment items. Below is an example:
Element Performance Criteria Assessment Instructions Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Requires Checking?
As mentioned in our blog post Common Problems In Assessment Tools, you need to ensure that your assessment tools allow trainers to follow assessment principles and evidence rules.
Key Principles of Assessment
Fairness – Is equal opportunity and access provided to everyone in the assessment process?
Flexibility – read more Does the assessment offer multiple ways to show competence according to different needs and preferences?
Validity – Is the assessment measuring what it is supposed to measure? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment achieve the same results every time, regardless of who conducts the training? Will different assessors consistently make decisions on skill competence?
Evidence Key Rules
Validity – Does the evidence show the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there sufficient evidence to ensure the learner has the required skills and knowledge?
Authenticity – Is the assessment tool confirming that the work is the candidate’s own?
Currency – Do the assessment tools correspond to current units of competency and industry practices?
Despite being frequently covered in VET professional development and nationally recognised training, many tools still have issues with these requirements.
To avoid using learning resources that leave certain unit requirements unaddressed, ensure you adhere to these guidelines:
Show What You Mean
Focus on the verbs used in the unit requirements and make sure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:
Carry out each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:
changing nappies
bottle preparation, feeding infants from bottles, and cleaning equipment
prepare solid foods and feed babies
respond suitably to baby signs and cues
settle infants for sleep and prepare them
monitor and encourage physical exploration and gross motor skills suitable for the age
Having students describe changing nappies for babies under 12 months doesn’t directly address the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.
Mind the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.
Full Compliance or Not Competent
Mind the lists. Again, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Be More Specific
Every assessment item must have clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, make sure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What types of information can be included in a work package?
The answer might include:
Obligatory resources
Related costs
Time frame for activities
Designated roles and responsibilities
When an assessment item calls for multiple answers, indicate the number of answers a student needs to provide. This way, your assessment is reliable, and the evidence gathered is valid.
This applies equally to assessment items with double-barrelled questions or questions that require more than one answer at the same time. These can confuse students and assessors, as illustrated in the example below:
Name a hazard and/or environmental issue in the workplace and choose the most effective hazard control hierarchy.
Answers could include, but are not limited to:
Weather conditions – work area isolation, engineering controls, PPE
Work area and ground conditions – elimination, isolating, engineering controls
People – isolating, use of engineering controls, administration
Structural hazards – substituting, isolation, use of engineering controls
Chemical hazards – isolating, use of engineering controls, administration
Equipment or machinery – isolating, engineering, administration
Steering clear of double-barrelled questions makes it easier for students to answer and for assessors to accurately judge student competence.
Seeing these requirements, you might wonder, “Don’t learning resource developers provide audit guarantees?” However, these guarantees mean you must wait for an audit to rectify noncompliance. This affects your compliance history, so it’s wiser to take a safe and compliant approach.